Home
Up 
 

Alternator Fan Belt

Check the tension on your fan belt. With strong fingers, you should be able to push / deflect the centre of the belt 0.5". To adjust, slacken off the three pivot bolts (two at the bottom, one at the top) so that the alternator will move.

Hold the alternator body so that the fan belt is tight, and re-tighten the top bolt. If the tension looks good, then re-tighten the lower bolts. If the fan belt is loose, it will slip and make that horrible shrieking noise.

My fan belt gets quite noisy at times and I have found that if I spray some 'belt dressing' on it quietens down dramatically. This is available from all good car shops.

[ Back ] [ Up ] [ Next ]

Keep your cars looking great with car detailing supplies that are affordable and high-quality.

	Cheap car insurance quotes online		Cheap Car Insurance from SuperQuote!
This web page is owned and operated by Mark Swetnam				Last updated 10/01/2011 © 2009 E-mail: Mark@Swetnam.co.uk
You are visitor number since 14/02/2000
Keeping 'The Legend Alive' on the World Wide Web since 1995!